5-tert-Butyl-2-furoic acid
5-tert-Butyl-2-furoic acid
CAS: 56311-39-8
Molecular Formula: C9H12O3
5-tert-Butyl-2-furoic acid - Names and Identifiers
| Name | 5-tert-Butyl-2-furoic acid |
| Synonyms | 5-tert-butyl-2-furoic acid 5-tert-Butyl-2-furoic acid 5-tert-butylfuran-2-carboxylic acid 2-furancarboxylic acid, 5-(1,1-dimethylethyl)- |
| CAS | 56311-39-8 |
5-tert-Butyl-2-furoic acid - Physico-chemical Properties
| Molecular Formula | C9H12O3 |
| Molar Mass | 168.19 |
| Storage Condition | Room Temprature |
| Sensitive | IRRITANT |
| MDL | MFCD00094279 |
5-tert-Butyl-2-furoic acid - Risk and Safety
| Hazard Class | IRRITANT |
5-tert-Butyl-2-furoic acid - Introduction
5-tert-Buyl-2-furoic acid is an organic compound with the chemical formula C10H14O3. The following is a description of its nature, use, formulation and safety information:
Nature:
5-tert-Butyl-2-furoic acid is a white to pale yellow solid, soluble in organic solvents such as ethanol and ether. It has a furan ring and a carboxylic acid functional group, exhibiting acidic properties.
Use:
5-tert-Butyl-2-furoic acid is commonly used as a pharmaceutical and pesticide intermediate. It can be used to synthesize a variety of organic compounds, including drugs, pesticides, dyes and coatings. It can also be used as a protecting group in organic synthesis.
Preparation Method:
5-tert-Buyl-2-furoic acid is usually prepared by epoxidation of furan. First, tert-butylphthalane is reacted with hydrogen peroxide to produce tert-butylphenol, then the epoxide compound of furan is produced by reaction with chlorine and sodium hydroxide, and finally hydrolyzed with dilute acid or anhydride to give 5-tert-Butyl-2-furoic acid.
Safety Information:
5-tert-Buyl-2-furoic acid is considered a relatively safe compound under normal conditions. However, as an organic compound, it may cause certain harm to health and the environment. Correct laboratory safety procedures should be followed, including wearing appropriate protective equipment and operating in a well-ventilated area. If contact with skin or eyes, rinse immediately with plenty of water. When handling and using this compound, avoid inhaling its particles or vapors. If you feel unwell or swallow, please seek medical attention.
Nature:
5-tert-Butyl-2-furoic acid is a white to pale yellow solid, soluble in organic solvents such as ethanol and ether. It has a furan ring and a carboxylic acid functional group, exhibiting acidic properties.
Use:
5-tert-Butyl-2-furoic acid is commonly used as a pharmaceutical and pesticide intermediate. It can be used to synthesize a variety of organic compounds, including drugs, pesticides, dyes and coatings. It can also be used as a protecting group in organic synthesis.
Preparation Method:
5-tert-Buyl-2-furoic acid is usually prepared by epoxidation of furan. First, tert-butylphthalane is reacted with hydrogen peroxide to produce tert-butylphenol, then the epoxide compound of furan is produced by reaction with chlorine and sodium hydroxide, and finally hydrolyzed with dilute acid or anhydride to give 5-tert-Butyl-2-furoic acid.
Safety Information:
5-tert-Buyl-2-furoic acid is considered a relatively safe compound under normal conditions. However, as an organic compound, it may cause certain harm to health and the environment. Correct laboratory safety procedures should be followed, including wearing appropriate protective equipment and operating in a well-ventilated area. If contact with skin or eyes, rinse immediately with plenty of water. When handling and using this compound, avoid inhaling its particles or vapors. If you feel unwell or swallow, please seek medical attention.
Last Update：2024-04-09 21:01:54
